Need help?Do you have a question about the SilverStone SUGO 16 and is the answer not in the manual?
General| Brand | SilverStone |
|---|---|
| Model | SUGO 16 |
| Category | Chassis |
| Language | English |
Details on the mounting hardware for 2.5-inch SSDs and motherboards.
Details on the mounting hardware for PSUs and 3.5-inch HDDs.
Description of wire management accessories like bunch wire taps.
Information about the included foot pads for the chassis.
Step-by-step guide to removing the chassis side panels for access.
Instructions for installing the motherboard's rear I/O shield.
Guide on how to securely fasten the motherboard using screws.
Steps to remove screws and the 2.5-inch device tray.
Instructions for installing 2.5-inch devices into the tray and chassis.
Procedure for removing the front panel of the chassis.
Overview of mounting positions for fans, devices, and PSUs.
Steps for removing PCI slot baffles and covers.
Guide on installing the graphics card and PCI slot covers.
Instructions for connecting all internal power and data cables.
Guide on how to install the PSU, referencing mounting positions.
Steps to connect the power cord extension to the PSU.
Procedure for turning on the PSU and securing the power cord.
Final steps for installing front and side panels, marking installation completion.
Details CPU cooler height limits based on PSU type and side panel clearance.
Specifies the maximum allowable CPU cooler protrusion beyond the motherboard edge.
Information on supported PSU types and chassis internal space for components.
Limits on graphics card length, width, and thickness based on installation method.
Recommendations for SATA cable connector types to avoid impacting graphics card space.
Steps for removing and accessing the dust filters for cleaning.
Important safety and procedural notes for removing the graphics card.
Details on product warranty coverage, limitations, and claim procedures.
Contact details for customer support and warranty service in various regions.
To Next Page
