SilverStone CS351 User Manual

www.silverstonetek.com
CS351
5-bay SAS-12G / SATA-6G hot-swappable
high performance NAS chassis

SilverStone CS351 Specifications

General

Brand	SilverStone
Model	CS351
Category	Chassis
Language	English

Summary

Installation Guide

Step 1: Remove Top Cover

Instructions for removing the top cover of the chassis.

Step 2: Remove 2.5" Drive Bracket

Instructions for removing the 2.5 inch drive bracket from the fan bracket.

Step 3: Remove Expansion Card Slot Cover

Instructions for removing the expansion card slot cover.

Step 4: Remove Fan Bracket

Instructions for removing the fan bracket.

Step 5: Remove Hard Drive Tray Module

Instructions for removing the hard drive tray module.

Step 6: Remove 3.5" Hard Drive Cage

Instructions for removing the 3.5 inch hard drive cage.

Step 7: Install Motherboard

Instructions for installing the motherboard.

Step 8: Install Hard Drives into 3.5" Cage

Installing hard drives into the 3.5 inch hard drive cage.

Step 9: Connect Power/IO/SATA Connectors

Step 10: Install Tray Module & Connect Cables

Step 11: Install PSU and Connect Cables

Step 12: Install Graphics Card

Step 13: Install Hard Drives into 2.5" Bracket

Step 14: Reinstall Fan Bracket

Step 15: Reinstall Expansion Slot Cover

Step 16: Reinstall Top Cover

Component Restrictions

CPU Cooler and Fan Clearances

PSU Depth Limitations

Graphics Card Length vs. Drive Count

Warranty Terms & Conditions

General Warranty Terms and Conditions

Warranty Service and Contact Information