SYSTEM OPERATIONS-63
You may have chosen as an option when you
purchased your 33C, an electronically controlled
Shift/Throttle Control System, factory installed at
the Silverton plant. The purpose of this system is to
provide the operator with smooth, positive shift and
throttle operation requiring minimal manual effort.
With this system, only one (1) shift/throttle control
lever is required per engine; the left control lever
operates the Port Engine and the right control lever
operates the Starboard Engine.
The Ultra-Flex Shift/Throttle Control System is
operated on DC Electrical Power, controlled by a
breaker switch located on the DC Electrical Panel
and described as “Accessory” (Refer to the Electrical
Pages in this section of this Owner’s Manual for the
switch location).
Refer to the Ultra-Flex Controls Manual included
with your Owner’s Packet for additional technical
information concerning the operation and main-
tenance of the ULTRA-FLEX SHIFT/THROTTLE
CONTROL SYSTEM.
SHIFT/THROTTLE CONTROL SYSTEM
(Ultra-Flex Controls) (OPTIONAL)
To Next Page
Loading...