Silverton 33C - Icemaker Unit (Optional)

SYSTEM OPERATIONS-69
You may have chosen as an option when you pur-
chased your 33C, an Icemaker Unit, factory installed
at the Silverton plant. The purpose of this system is
to provide you with a continuous supply of fresh ice
upon demand and as needed.
The Icemaker Unit, which is located in the cockpit,
operates on AC Electrical Power, and is controlled
by a breaker switch located on the AC/DC Electrical
Panel (See AC/DC Electrical Panel Layout in the
Schematics Section of this Manual, which illustrates
the location of the breaker switch that controls the
Icemaker Unit). While your 33C is underway, you
must operate your generator (if so equipped) to
maintain operation of the Icemaker Unit.
Refer to the ICEMAKER MANUAL included with
your Owner’s Packet for specifi c instructions
concerning the operation and maintenance of
the ICEMAKER UNIT.
ICEMAKER UNIT (Optional)