Silverton 33C - MAINTENANCE SCHEDULE

GLOSSARY-11
MAINTENANCE SCHEDULE
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Check oil levels
Check fuel sytem for leaks
Check cooling system for leaks
Check exhaust system for leaks
Check for loose or damaged parts
Change engine oil
Replace oil filter
Clean flame arrestor
Check electrical connections
Check belt drive tension
Tighten engine mounts
Check engine alignment & tighten bolt
Check condition of zinc anodes
Check fuel canister for corrosion
Check condition of spark plugs-NOTE 1
ITEM
DAILY 75 Hr. 250 Hr. YEARLY 2 YRS.
Check exhaust system for leaks
Check for loose or damaged parts
Check fuel sytem lines for leaks
Drain water and sediment from primary fuel filter
Tighten engine mounts
Check engine alignment & tighten bolt
Clean or replace air cleaner elements-NOTE 2
Check oil levels
Check oil and filters-NOTE 3
Check cooling system for leaks
Check zinc anodes
Clean seawater strainer and inspect and lubricate impeller-NOTE 4
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Check Transmission fluid level
Change Transmission fluid
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Check propeller for dents or gouges-NOTE 5
ITEM
DAILY 25 Hr. 50 Hr. 100 Hr. YEARLY
Halon fire extinguishers-NOTE 6
Check Battery electrolyte level
Check raw water strainers (generators, engines, AC units)
Check pumps (bilge & shower sump) for automatic operation
NOTE 1 - Replace spark plugs yearly NOTE 4 - More frequently if operated in shallow water
NOTE 2 - More often if necessary NOTE 5 - Retrue if necessary
NOTE 3 - Or once a year NOTE 6 - Remove and weight every six months
MISCELLANEOUS MAINTENANCE SCHEDULE
GASOLINE ENGINE MAINTENANCE SCHEDULE
DIESEL ENGINE MAINTENANCE SCHEDULE
TRANSMISSION MAINTENANCE SCHEDULE
PROPELLER MAINTENANCE SCHEDULE