SYSTEM OPERATIONS-66
Periodically examine the Trim Tabs for accumula-
tion of underwater growth and clean as necessary.
Periodically examine the Trim Tab Pump and
hydraulic lines, which are located in the bilge area,
for leaks (Refer to the Mechanical Schematic in the
Schematic Section of this Owner’s Manual for the
location of the trim tab pump). Tighten connections
if leaks are noted. If the hydraulic lines appear worn
or chafed, contact your Silverton Dealer for inspection
and replacement, if necessary.
The photo below shows the Trim Tab Pump.
Refer to the BENNETT TRIM TAB Manual included
with your Owner’s Packet for technical informa-
tion concerning the operation and maintenance
of the trim tab system.
To Next Page
Loading...