•
Cinema: the color gamut nearest to the DLP Cinema. As for the User
mode, the user could change the whole relative values of the color gamut
through the On Screen Display, in the CMS menu.
Note: Any DOMINO4-H 25-28 is factory adjusted to reach the HDTV REC709
standard color gamut. Calibration is stored in the Color Gamut “HDTV” and it
was obtained selecting the Display Mode “Natural”, “HDR” or “HLG” with Color
Temperature “D65” and Gamma “2.2”.
Note: Any DOMINO4-H 25-28 is factory adjusted to have the primaries colors in
the maximum gamut positions, that coverage the 82% of DCI-P3, and
secondaries colors calibrated. Calibration is stored in the Color Gamut “LCC” and
it was obtained selecting the Display Mode “BrightHDR”, or “BrightHLG”.
•
Color Management System (CMS)
This function allow to customize the Color Gamut by the user, when it is selected
the Color Gamut “User” or “Cinema”.
Press the to enter the menu and then use or to select item.
Select one of the colors (Red/Green/Blue/Cyan/Magenta/Yellow/White) to
adjust its x & y oset and brightness.
•
Color: use or to select from Red, Green, Blue, Cyan, Magenta, Yellow
or White colors.
•
x Oset: use or to adjust the x oset value of selected color.
•
y Oset: use or to adjust the y oset value of selected color.
•
Brightness: use or to adjust the brightness value of selected color
(not available for White).
•
Reset: choose “YES” to apply the factory default settings for color
adjustments.
•
Exit: to exit from the CMS settings.
To Next Page
Loading...
