Display – Aspect Ratio
Press the to enter the menu.
Press or to select the status.
Range [4:3, 16:9, LBX, Superwide, Native, Auto]
This adjustment changes the dimensions and aspect ratio (relationship between
width and height) of the displayed image. There are six default aspects available. You
can select a dierent aspect for each source: the selected aspect ratio will be
automatically applied the next time the relative source is displayed.
The following aspects are available:
•
4:3: this format is for 4x3 input sources.
•
16:9: this format is for 16x9 input sources, like HDTV and DVD enhanced for
Widescreen TV.
•
LBX (Letterbox): this format is for non-16x9, letterbox source and for users who
use external anamorphic lens to display 2.35:1 aspect ratio using full resolution. It
displays a 4:3 letterbox image (source signal with black bands above and below
the picture) in such a way that it fills the 16:9 screen and maintains the correct
aspect. This aspect ratio is also recommended when using Anamorphic Lenses.
Some letter box format DVDs are not enhanced for 16x9 played in 16:9 mode. In
this situation, please try to use the 4:3 mode to view the DVD. If the content is
not 4:3, there will be black bars around the image in 16:9 display. For this type of
content, you can use LBX mode to fill the image on the 16:9 display.
If you use an external anamorphic lens, this LBX mode also allows you to watch
a 2.35:1 content (include Anamorphic DVD and HDTV film source) that support
anamorphic wide is enhanced for 16x9 Display in a wide 2.35:1 image. In this
case, there are no black bars. LED power and vertical resolution are fully utilized.
•
Superwide: use this special 2.0:1 aspect ratio to display both 16:9 and 2.35:1
aspect ratio.
•
Native: this format displays the original image without scaling.
•
Auto: automatically selects the appropriate display format.
Note: some LBX aspect format DVDs are not enhanced for 16x9 TVs. In this situation,
the image will not look right when displaying image in 16:9 mode. In this situation,
please try to use the 4:3 mode to view the DVD. If the content is not 4:3, there will be
black bars around the image in 16:9 display. For this type of content, you can use LBX
mode to fill the image on the 16:9 display. If you use an external anamorphic lens, this
LBX mode also allows you to watch a 2.35:1 content (include Anamorphic DVD and
HDTV film source) that supports anamorphic wide is enhanced for 16x9 Display in a
wide 2.35:1 image. In this case, there are no black bars. Lamp power and vertical
resolution are fully utilized.
Note: to use the Superwide format, set the screen aspect ratio to 2.0:1, than select
“Superwide” format and final, align the projector image correctly on the screen.
To Next Page
Loading...
