Simaudio Moon 340i x - Remote operation with multiple MOON components

MOON by Simaudio
Remote operation with multiple MOON components
In figure 6 we have a 180 MiND Music Streamer and a MOON 340i Integrated Amplifier connected
together via their respective SimLink™ ports. The SimLink™ output on the 180 MiND is connected
tothe SimLink™ input on the 340i (using a 1/8” mini-jack cable). When you launch the MiND App
onyour smart device and select this system’s ZONE, both the 180 MiND and the 340i will turn on,
withthe 340i automatically switching to the MiND assigned input, as described previously
intheSimLink™ section. To shut down the system, press “Off” for this ZONE in the MiND app.
In figure 7 we have a MOON 340i Integrated Amplifier (used either as ONLY a preamplifier orinabi-
amping configuration) and 330A Amplifier connected together via their respective 12V triggers;
The12V trigger output on the 340i is connected to the 12V trigger input on the 330A (using a 1/8”
mini-jack cable). When you turn on the 340i via remote control (or its Standby button),
the330Awillalso turn on. The same rule applies when you put the 340i into Standby mode.
Figure 9 : Remote Operation with 12V Trigger
Figure 8 : Remote Operation with SimLink™