EasyManua.ls Logo

Simaudio Moon 340i x - Unpacking; Installation & Placement

Simaudio Moon 340i x
22 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MOON by Simaudio
Unpacking
The MOON 340i integrated amplifier should be removed from its box with care.
The following accessories should be included inside the box with your integrated amplifier :
AC power cable
‘CRM-3” remote control with two “CR-2032” batteries
“SimLink™ cable with 1/8” mini plug terminations on each end
This owner’s manual
Warranty and product registration information (USA and Canada only)
Once the MOON 340i is unpacked, inspect it thoroughly and report any damage to your dealer
immediately. We suggest that you keep all of the original packaging, storing it in a safe, dry place in case
you’re required to transport this product. The customized packaging is specially designed to protect
the340i from any potential damage during transit.
The MOON 340i Integrated Amplifier is both
powerful and heavy. It requires reasonable
ventilation to maintain an optimum andconsistent
operating temperature, especiallysince
itwillradiate heat when driven hard.
Consequently,it should be placed inalocation
withempty space around it forproper heat
dissipation. You should never place another
component on top of thisintegrated amplifier.
Aswell, it should be placed on a solid level surface.
You should avoid placing it near a heat source
orinside a closed cabinet that is not well ventilated
asthis could compromise the amplifier’s
performance andreliability. The 340i uses a large
toroidal transformer in its power supply;
Serial Number
Installation & Placement
eventhough itiswell shielded, you should not
place thisintegrated amplifier too close to source
components sensitive to EMI, such as turntables,
phono preamplifiers and CD Players.
Finally,youshould never place another component
directly on top of this integrated amplifier.
If you intend to use the MOON 340i’s USB input
connection (PCM or DSD) with a Windows-based
computer, you will need to install ourUSBHD
DSD driver, which can be downloaded
fromthesupport section ofourwebsite.
Note: Apple-based computers don’t require
thisdriver.
Please write the serial number of your new MOON 340i in the space provided below for future reference.

Related product manuals