11X-Press
Operating Instructions
1.SafetyData
1.3 Operational Safety
The machine is to be put in operation
only after instruction has been provided
by an employee of the authorised dealer
or an employee of SIMBA. The “Machine
Registration”formistobecompletedand
returnedtoyourdealer.
All protective and safety equipment, such
as removable protective equipment, must
beinplaceandfunctioningreliablybefore
themachineisputinuse.
Checkscrewsandboltsregularly
for tightness and retighten if
necessary.
In the event of malfunctions,
stop and secure the machine
immediately.
Ensurethatanyfaultsareremedied
immediately.
1.4 No Liability for
Consequential Damage
The X-Press has been manufactured by
SIMBAwithgreatcare.However,problems
may still occur when it is used for the
intendedpurpose.Thesemayinclude:
•Wornwearingparts.
•Damagecausedbyexternalfactors.
•Incorrectdrivingspeeds.
• Incorrect setting of the unit (incorrect
attachment, non-adherence to the Setting
instructions).
Therefore, it is crucial to always
check your machine before and
during operation for correct
operationandadequateapplication
accuracy.
Compensationclaimsfordamagewhichhas
not occurred to the machine is excluded.
This includes any consequential damage
resultingfromincorrectoperation.
1.2 Use for the Intended
Purpose
The SIMBA X-Press is built using the
latest technology and in accordance with
therelevantrecognisedsafetyregulations.
However,risksofinjuryfortheoperatoror
thirdpartiesandimpairmentofthemachine
orothertangibleassetscanariseduringuse.
Themachineisonlytobeoperatedwhen
inatechnicallyperfectconditionandforthe
intendedpurpose,takingintoconsideration
safetyandrisksandfollowingtheOperating
Instructions. In particular, faults that can
impairsafetyaretoberemediedimmediately.
OriginalpartsandaccessoriesfromSIMBA
have been specially designed for this
machine.Sparepartsandaccessoriesnot
supplied by us have not been tested or
authorised.Installationoruseofnon-original
SIMBA products may have a detrimental
effect on specic design features of the
machineand affectthesafety ofmachine
operatorsandthemachineitself.SIMBAwill
acceptnoliabilityfordamageresultingfrom
theuseofnon-originalpartsoraccessories.
TheSIMBAX-Pressisdesignedsolelyas
acultivationimplement.Useforanyother
purpose,e.g.,asameansoftransport,will
bedeemedtobeimproperuse.SIMBAwill
acceptnoliabilityfordamageresultingfrom
improperuse.Theriskwillbebornesolely
bytheoperator.
Use of the X-Press behind high power
tractors (in excess of 40% above the
maximumrecommended)canleadtohigh
loads andstresses which can cause long
termstructuraldamagetothechassisand
key components. Such overloading can
compromisesafetyandistobeavoided.