EasyManua.ls Logo

Simba X-Press - Transportation and Installation; Delivery; Transportation; Installation

Default Icon
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15X-Press
Operating Instructions
2.3 Installation
Whencarryingoutinstallationandmainte-
nanceworkthereisahigherriskofinjury.
Itisimportantthatyoufamiliariseyourself
with the machine and read the Operating
Instructionsbeforehand.
Operatorinstructionandinitialinstallationof
themachinearecarriedoutbyourservice
techniciansorauthoriseddistributors.
Themachinemustnotbeusedinanyway
beforehand!The machinecanonlybere-
leasedforoperationafterinstructionshave
beenprovidedbyourservicetechniciansor
authoriseddistributors.
•Ifanymodulesorpartshavebeenremoved
fortransportation,theseshallbemountedby
ourservicetechnicians/authoriseddealers
beforetheinstructiontakesplace.
•Checkallimportantscrewconnections!
•Lubricateallnipplesandjoints!
•Checkallhydraulicconnectionsandlines
fordamage.
2. Transportation and
Installation
Transportationandinitialinstallationofthe
machinearedescribedinthischapter.
2.1 Delivery
The machine is normally delivered, fully
assembled.
•Themachinecanbeliftedoffwithacrane
orothersuitableliftingequipment.
•Themachineshouldbehitchedtoatractor
anddrivenoffalow-loader.
2.2 Transportation
TheX-Presscanbetransportedonpublic
roadsbyhitchingituptoatractororona
low-loader.
• It is important to observe the permitted
dimensionsandweightswhentransporting
themachine.
•Ifthemachineistransportedonatraileror
alow-loader,itmustbesecuredusingstraps
orotherdevices.
Before transporting the machine on
public roads, it must be adjusted to its
transportationpositionandthestipulations
relatingtoroadtransportationfullled.
The transportation width can
varyaccordingtotheadjustment
of working parts (eg. discs, roll,
etc). It may be necessary to
adjusttheseelementsinorderto
achieve the minimum transport
width.
Adjustments, including the
attachmentoftransportdevices,
shouldbemadeatgroundlevel;
lowering the machine may be
necessarytoachievethis.
• The maximum permissible speed is 25
km/h.
2.Transportation/Installation

Table of Contents

Other manuals for Simba X-Press