9752090250 ECM Lite 11/03
26
+Attention:
- Use only the supplied fasteners to fix the bracket (fastening screws M4x8) to the
ECM.
- Do not route high voltage cables next to any sharp metal components and take care
to avoid sharp bends and kinks in the cable.
- Keep high-voltage cables as short as possible.
6. Putting into use
Warning:
- High voltages are hazardous for people who have a pacemaker.
- Ensure that the generator is properly earthed.
- Touching live parts of the charging bar/electrode will cause an unpleasant electrical
shock.
6.1. Switching on and off
- Switching on = [0 / l] switch in [l] position.
- Switching off = [0 / l] switch in [0] position.
When the equipment is switching off, the overload LED lights briefly.
To Next Page
Loading...