Sime LAGO EV - Components; Description and Identification of the most Important; Main Features

43
EN
Cutting-edge protection is applied inside
the device: glazing.
This distinguishes itself by:
– the highest protection against
corrosion and electrolytic reactions to
extend the useful life of the tank;
– its high resistance to chemical
reactions caused by the soluble salts
in water;
– not affecting the taste and purity of
water.
In addition, the magnesium anode
attracts the salts dissolved in the water
for enhanced corrosion resistance.
Low energy consumption due to the use
of CFC-free polyurethane foam in the
space between the tank and the outer
shell of the water heater, reducing the
heat loss from the hot water in the tank.
The outer surface of the water heater
is painted using a material with high
resistance to harsh outdoor conditions,
yet the appliance remains pleasing to
the eye.
15
12
11
13
14
10
9 8
2
1
5
6
4
3
7
Fig. 15
1 porcelain enamel
2 polyurethane insulation
3 thermometer
4 magnesium anode
5 outer shell
6 inner tank
7 pilot light
8 thermostat control
9 dielectric unions
10 plastic protector
11 stainless steel diffuser
12 pendant bracket
13 heating element
14 universal bracket
15 stainless steel hot water outlet tube
1 MAIN FEATURES
1.1 Description and identification of the most important components