playing a song
selecting
listening
song volume
song tempo
8
The module contains 48 preset songs.
Note: The preset song setting is 001 when you power up.
1. Press [song/volume] button.
The song indicator lights up and the current song number will appear.
2. Press [+] or [ - ] buttons to select song. Song numbers 001-048
are preset songs. (Reference song list is on page 15.)
1. Press [start/stop] button. The beat indicator will flash at the song tempo.
After count-in, the song will start playback from the beginning.
2. The song will stop when it reaches the end. You can stop the
song during playback by pressing the [start/stop] button.
The click indicator flashes at the first beat of each measure.
The pad indicator will show which pad the drum track is triggering.
Note: The pad indicators can be turned off by pressing both
[hi-hat] control and [kick] buttons at the same time.
1. Press the [song / volume] button to select song volume.
Display will show: “AXX” (XX = level value, 00 to 31)
2. Press [+] or [ - ] buttons to adjust the volume of song accompaniment.
1. Press the [tempo + ] or [tempo - ] buttons. Display will show the current tempo value.
2. Press the [tempo +] or [tempo - ] buttons to increase or decrease the tempo.
(tempo value in the range of 30 to 280)
Holding down the [tempo +] or [tempo - ] button for faster tempo change.
Press [tempo +] and [tempo - ] buttons at the same time to reset the
tempo to default value.
Note:
About 2 seconds after you stop pressing the [Tempo] button,
the display changes to show your selected song, voice or kit
number instead of tempo value.
To Next Page
Loading...
