Simoco SDM630 Series Operating Instructions

SDM630 DMR TIER II – OPERATING INSTRUCTIONS
© SimocoGroup Australasia 2013 page 30 TNM-U-E-0108 Issue 1.1
The selections are:
•
Call – Calls the selected sender.
• SMsg – Sends a short message to the sender
•
TxtMsg
– To edit and send a text message to the sender.
Selection is made using the ▼ and ▲ keys.
The “Menu” or “Back” key press returns to the “Messages View” pop-up screen.
A “Reset” function key press (if configured) takes the radio back to the default screen display.
If “Call” and “OK” is selected, the radio returns to the default screen and is set to individual
calling mode for a time out period determined by radio configuration.
When the radio is PTT’d, an individual voice call is sent to the message sender.
If “SMsg” is selected, pressing “OK” displays the Message Reply - Short Messages screen.
If “TxtMsg” is selected, pressing “OK” displays the Message Reply –Text Edit screen.
4.2.12.6 Short Message Reply
This menu is used to reply with a pre-defined short message.
This screen shows:
• The destination unit identifier,
• The selected short message.
The short message can be selected from the short message list by using the ▼ and ▲ keys.
A “Reset” function key press (if configured) takes the radio back to the default screen display.
A “
Back
” or “
Menu
” keypress returns to the Message Reply Pop-up screen.
When “OK” key is pressed, the selected short message is sent in reply to the received
message, and the radio returns to the default screen.

Simoco SDM630 Series Specifications

General

Brand	Simoco
Model	SDM630 Series
Category	Radio
Language	English