SDM630 DMR TIER II – OPERATING INSTRUCTIONS
© SimocoGroup Australasia 2013 page 31 TNM-U-E-0108 Issue 1.1
4.2.12.7 Text Message Reply Screen
This menu is used to reply with a free form text message.
The maximum length of text message is 210 characters.
The characters are entered via the keypad by pressing the relevant key one or more times to
choose each character.
The ▼ key is used to move the curser to the left.
The ▲ key is used to move the curser to the right.
A “Reset/clear” button press and hold for less than one second deletes the character to the
left of the cursor, and moves the curser position to the left by one.
Holding the “Reset/Clear” button down for more than one second deletes all characters from
the curser position to the right. A new character entered is put on the current cursor location.
The ‘#’ key is used to toggle upper and lower case.
The “0” key is the space key.
When “Back” key or “Menu” key is pressed, the radio returns to the Message Reply pop-up
screen.
Pressing “OK” sends the edited text message in reply to the sender of the message. The
radio returns to the default screen.
4.2.12.8 Send Message (Short or Text)
This menu is used to send either a short message or a text message to another party.
Select Messages from the main menu and then choose either “SMsg” (Short Message) or
“TXTMsg” (Text Message).
To Next Page
Loading...
Need help?
General
