Simoco SRM9030 User Manual

SRM9030 ~ PMR Mobile Radio User Guide
TNM-U-E-0003 Issue 4a Page 12 © ComGroup Australia 2010
4.6 SEND MESSAGE
This Screen allows the user to send a free form text message to another radio
user in a similar manner to a cell phone SMS.
Upon selecting the Send Message menu option with the OK button, a flashing
cursor will appear on the lower left hand corner of the screen.
Each key is labelled with up to 3 text characters. The
text characters are entered by pressing the keypad
key once for the first character, twice for the second
and three time for the third.
After a short delay, the cursor will advance for the
next character entry.
To move the cursor left or right, use the -/+ buttons.
To delete a character, move the cursor over the character and then press the
function key that is programmed with the Reset function.
When the message is complete, press the OK button to send it. The screen
will then ask for the address to send it to with “Enter No.” Enter the address
and then press OK. The message will be sent.
4.7 SETUP SCREEN
Use this Screen to access the other Setup
submenus.
Press (OK) or the Left/Right Arrow
buttons to show the first of the submenus, and
then the Up/Down Arrow buttons to scroll
through these screens.
OK
Setup
#01
Send Message
PICK UP
OK
Delete

Simoco SRM9030 Specifications

General

Brand	Simoco
Model	SRM9030
Category	Radio
Language	English