Simon Scena - Page 71

71
ENG
Index
1 Introduction Scena 74
1.1 Functionalities 75
1.2 Functionalities 77
1.2.1 Touch Light Manager central console 77
1.2.2 Touch Light Keypad 77
1.2.3 Power modules 78
1.2.4 References compatible with digital signal converter 80
1.2.5 References compatible with analog converter signals 80
2. Scena connections 81
2.1. General connections 81
2.2 Connection of each Device 84
2.2.1 TouchLightManager 84
2.2.2 TouchLight Keypad 84
2.2.3 Electronic Switch-Type Circuit Breaker module 84
2.2.4 Electronic transformer regulator module 85
2.2.5 Parallelable electronic transformer regulator module 85
2.2.6 0-10V Regulator Module 86
2.2.7 Blind control module 86
2.2.8 Analog signal converter 87
2.2.9 Digital signal converter 87
2.2.10 DMX-PWM converter 87
2.2.11 DMX-DALI converter 88
2.2.12 External device 88
2.3 Example of Standard Connections 89
3. Device Registration 90
3.1 Switch operation (Installer) 90
3.1.1 Automatic registration 90
3.1.2 Manual registration 91
3.1.3 Examples 91
3.2 Recommendations (Installer) 91
4. Frequently asked questions 92
5. User manual 93
5.1 Introduction to Scena 93
5.2 Access to installer mode 94
5.2.1 Checking the Installation, Test Screen 95
5.3 Creation of channels 96
5.4 Standard channel settings 98
5.4.1 Electronic transformer regulator module 99
5.4.2 Electronic Switch-Type Circuit Breaker module 99
5.4.3 0-10V Regulator Module 100
5.4.4 Module with blind control 100
5.4.5 DMX/PWM converter 101