79
ENG
Digital signal converter
Transfers a 0 to 230V type digital signal to DMX.
2 independent digital inputs.
Examples:
- Link up a scenario to a presence detector from the console.
- When you insert the card in the card rack the “Welcome” scenario is activated
Ref. 89000301-039
Analog signal converter
Transfers a 0-10V analog signal to DMX.
2 independent 0-10V analog inputs
Example:
- Connect a detector for controlling constant light from the console to a group of
luminaires.
Ref. 89000302-039
DMX/DALI converter
· Enables us to control luminaires with DALI protocol via DMX.
· Enables us to control up to 6 DALI outputs each with 16 ballasts.
· Measurements 108 x 75 x 61 mm.
· Installation on DIN rail: occupies 6 modules.
Ref. 89000300-039
DMX/PWM converter
· Enables us to control via DMX a luminaire with PWM control of 3
channels, for example Ledflex RGB.
· Measurements 86 x 51 x 19 mm.
· Installation in distribution box or false ceiling.
Ref. 89000303-039
12V 2A power source
· For DIN rail.
· Ideal for installations with over 16 regulators.
Ref. 8999901-039
To Next Page
Loading...