PROGRAMMING
10
To Set the Print Order Format
To select the order for printer output of the numbering , date, time and comment, choose the
number on the display which corresponds to the desired format.
Note: The Simplex 100 is capable of printing 20 characters.
Order
Options
Examples
1. NDTC
1 OCT09 AM 8:18 RCVD
2. NTDC
1
AM 8:18 OCT09 RCVD
3. NCDT
1 RCVD OCT09 AM 8:18
4. NCTD
1 RCVD
AM 8:18 OCT09
5. CNDT
RCVD 1 OCT09 AM 8:18
6. CNTD
RCVD 1
AM 8:18 OCT09
7. CDTN
RCVD OCT09 AM 8:18 1
8. CTDN
RCVD
AM 8:18 OCT09 1
A. Press CHANGE once.
B. Press ACCEPT until the programming arrow appears below ORDER.
Press CHANGE once.
• The PRINT ORDER option begins to blink. Using the examples above, choose a print
order format.
Press CHANGE until the desired option number is displayed.
D. Press ACCEPT to set the PRINT ORDER option shown on the display.
• The programming arrow moves to the next option (go to Step C of To Set the Print Date
Format).
Note: When choosing programming settings, ensure that the number of characters selected
does not exceed a total of 20 (see the illustration below).
12 / 24
HOUR
TIME
DATE
1
Total Characters Used
To Next Page
Loading...