Simplex 2004 Series User Manual

2 Introduction
The 2004-9101 is a conventional fire alarm control unit (FACU). The system includes four Class B Initiating Device Circuits (IDCs) and one
Notification Appliance Circuit (NAC). You can wire the NAC using Class A or Class B wiring.
Use the built-in Digital Alarm Communications Transmitter (DACT) for remote station or central station monitoring.
The 2004-9101 system uses audible and visible indications during alarm, supervisory or trouble conditions. If any of these conditions
occur, the system activates the applicable notification appliances, respective LEDs, and the control unit piezo. The indications continue
until an operator acknowledges the condition.
The user interface features LED indicators and a keypad. You can configure the various functions of the control unit using DIP switches on
the system board.
page 4 579-1403 Rev A
2004 Foundation Series Fire Alarm Control Unit Operation Guide

Simplex 2004 Series Specifications

General

Brand	Simplex
Model	2004 Series
Category	Control Unit
Language	English