Introduction
4007ES Series Fire Detection and Control Panels
provide extensive installation, operator, and service features
with point and module capacities suitable for a wide range of
system applications. The convenient and intuitive color
touchscreen provides easy access for typical system response
actions and for detailed system review or configuration
updates with password control to limit user access.
IDNet+ addressable initiation communications and IDNAC
addressable notification communications are standard
features. (Refer to data sheet S4007-0001 for 4007ES panels
providing conventional notification.)
Operator Interface
Convenient Status Information. With the locking door
closed, the glass window allows viewing of the display
status LEDs. The user interface is a 4.3” diagonal color
touchscreen LCD with separate status LEDs as shown
below.
LED indicators describe the general category of activity
being displayed with the LCD providing more detail. For the
authorized user, unlocking the door provides access to the
control functions and allows further inquiry by scrolling the
display for additional detail.
Operator Interface and Software Features
Convenient and detailed operator information is easily
accessed using a logical, menu-driven touchscreen
display with password access control
Multiple automatic and manual diagnostics for
maintenance reduction
Operator Interface Features (Continued)
Alarm and Trouble History Logs (up to 1000 entries for
each, 2000 total events) are available for viewing from
the display or to be downloaded to a service computer or
to the USB drive
Module level ground fault searching assists installation
and service by locating and isolating modules with
grounded wiring
WALKTEST silent or audible system test performs an
automatic self-resetting test cycle and supports up to 8
WALKTEST groups
Install Mode allows grouping of multiple troubles for
uninstalled modules and devices into a single trouble
condition (typical with future phased expansion); with
future equipment and devices grouped into a single
trouble, operators can more clearly identify events
from the commissioned and occupied areas
Mechanical Description
Locking door with polycarbonate window
Latching front panel assembly swings forward for
convenient internal access
Smooth box surfaces are provided for locally cutting
conduit entrance holes exactly where required
Modules are power-limited (except as noted, such as
relay modules)
Battery compartment (bottom) accepts two batteries,
up to 18 Ah, to be mounted within the cabinet without
interfering with module space; charger capacity is up
to 33 Ah; for batteries greater than 18 Ah, refer to
page 7 for external battery cabinet details
Cabinet assembly design has been seismic tested and
is certified to IBC and CBC standards as well as to
ASCE 7 categories A through F, requires battery
brackets as detailed on data sheet S2081-0019
2 S4007-0002-6 11/2015
Alarm Indicator
red LED
Priority 2 Indicator
red LED
Supervisory
Indicator yellow LED
Trouble Indicator
yellow LED
Alarm Silenced
yellow LED
AC Power
green LED
3 Programmable LEDs with Custom
Label Insert; top two selectable as
Red or Yellow, bottom selectable as
Green or Yellow
Color Touchscreen LCD with
sample Fire Alarm List showing
Touchscreen Display with LED Status Indicators (approximately full size)
To Next Page
Loading...
