EasyManuals Logo
Home>Simplex>Fire Alarms>4010

Simplex 4010 Installation Instructions

Simplex 4010
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
4010 Suppression Release Kits
Installation Instructions
¤
1998 Simplex Time Recorder Co., Gardner, MA 01441-0001 USA
All specifications and other information shown were current as of publication, and are subject to change without notice
574-166
Rev. B
DO NOT INSTALL ANY SIMPLEX PRODUCT THAT APPEARS
DAMAGED.
Upon unpacking your Simplex product, inspect the contents of the
carton for shipping damage. If damage is apparent, immediately file a claim
with the carrier and notify Simplex.
ELECTRICAL HAZARD -
Disconnect electrical power when making any
internal adjustments or repairs. Servicing should be performed by qualified
Simplex Representatives.
STATIC HAZARD - Static electricity can damage components. Therefore,
handle as follows:
1.
Ground yourself before opening or installing components (use the 553-484
Static Control Kit).
2.
Keep uninstalled component wrapped in anti-static material at all times.
RADIO FREQUENCY ENERGY -
This equipment generates, uses, and can
radiate radio frequency energy and if not installed and used in accordance with
the instruction manual, may cause interference to radio communications. It has
been tested and found to comply with the limits for a Class A computing device
pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide
reasonable protection against such interference when operated in a commercial
environment. Operation of this equipment in a residential area is likely to cause
interference in which case the user at his own expense will be required to take
whatever measures may be required to correct the interference.
This publication shows how to install the 4010-9814 (120V) and the 4010-9824
(240V) Suppression Release Kits into a 4010 Fire Alarm Control Panel (FACP).
Refer to the 4010 Fire Alarm - Installation Instructions (574-052) for
configuration information. Refer to the 842-058 Field Wiring Diagram for
additional wiring information.
This publication discusses the following topics:
Topic See Page #
Overview 1
4010-9814 and -9824 Suppression Release Kits 2
Installation 3
Wiring 5
Power-Up and Checkout 7
Cautions and Warnings
Overview
In this Publication
Technical Manuals Online! - http://www.tech-man.com

Other manuals for Simplex 4010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Simplex 4010 and is the answer not in the manual?

Simplex 4010 Specifications

General IconGeneral
BrandSimplex
Model4010
CategoryFire Alarms
LanguageEnglish

Related product manuals