Simplex TrueAlarm 4008-9102 User Manual

Features
Control panel operator convenience features:
 Wide viewing angle 2 x 20 (40 character) alphanumeric
LCD and dedicated LEDs provide convenient panel
status information
 Operation is programmable using a multi-function
keypad and the panel LCD or via service computer (PC)
 RS-232 service port provides upload/download PC
access for panel configuration and event history logs
 Software updates are via PC download
 Convenient library of standard custom label terms
 Standard on-board DACT provides: Contact ID, 3/1, 4/2,
BFSK, and SIA formats
 WALKTEST silent or audible system test
 Voltage and current for both the battery charger and the
battery can be displayed at the front panel LCD
Addressable Devices:
 Using IDNet communications, up to 200 addressable
TrueAlarm detection points or addressable device points
are available (see page 3 for details)
Two Standard Notification Appliance Circuits (NACs):
 Class A or Class B outputs with solid state overcurrent
protection per NAC, each rated for 2 A
 Selectable for Simplex
®
SmartSync two-wire
horn/strobe control or synchronized strobe control
Standard Power Supply:
 Provides 3 A maximum @ nominal 24 DC
 Automatic input power selection operates with 120 VAC
or 240 VAC, 50 or 60 Hz
 On-board temperature compensated battery charger for
up to 12.7 Ah batteries in cabinet (UL and ULC) and up
to 25 Ah batteries in separate cabinet (UL only)
Additional standard features:
 Programmable Active Status Reminder
 Two auxiliary relays
 NACs, Relay outputs, and communications circuits
are power limited (AC input, battery circuits, and City
Circuit Module outputs are non-power limited)
 Available with beige or red cabinet
 UL listed to Standard 864
Available option modules:
 Door mounted 24 LED annunciator (standard on ULC
models)
 3 A Expansion Power Supply with two on-board 2 A
NACs that operate the same as standard NACs
 City Interface Module and Auxiliary Relay Module
 Remote LCD and LED/Switch Annunciators
ALARM
ACK
SUPV
ACK
TROUBLE
ACK
ALARM
SILENCE
SYSTEM
RESET
FIRE
ALARM
SYSTEM
SUPERVISORY
SYSTEM
TROUBLE
ALARM
SILENCED
AC
POWER
CAUTION
DISCONNECT
BATTERY AND
A. C. POWER
BEFORE
SERVICING
4008-9102 (Beige) Standard Control Panel
ALARM
ACK
SUPV
ACK
TROUBLE
ACK
ALARM
SILENCE
SYSTEM
RESET
FIRE
ALARM
SYSTEM
SUPERVISORY
SYSTEM
TROUBLE
ALARM
SILENCED
AC
POWER
Fire Alarm Annunciator
CAUTION
DISCONNECT
BATTERY AND
A. C. POWER
BEFORE
SERVICING
4008-9122 (Beige) Control Panel with 24 LED Annunciator
(required for ULC applications)
Description
For areas requiring up to 200 addressable input devices and
up to 4 NACs, the Simplex 4008 Series fire alarm control
panels provide flexible initiating circuit monitoring,
extensive programmable control capability, and LCD
annunciated circuit-specific 20 character custom labels.
* See page 2 for additional ULC and MEA information. This product has been approved by
the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California
Health and Safety Code. See CSFM Listing 7165-0026:318 for allowable values and/or
conditions concerning material presented in this document. It is subject to re-examination,
revision, and possible cancellation. Additional listings may be applicable, contact your local
Simplex product supplier for the latest status. Listings and approvals under Simplex Time
Recorder Co. are the property of Tyco Fire Protection Products.
TrueAlarm Addressable Fire Alarm Control Panels
UL, ULC, CSFM Listed; FM Approved; 4008 Fire Alarm Control Panel for IDNet Addressable
MEA (NYC) Acceptance* Devices and TrueAlarm Addressable Smoke Detection
S4008-0001-8 8/2012

Simplex TrueAlarm 4008-9102 Specifications

General

Brand	Simplex
Model	TrueAlarm 4008-9102
Category	Control Panel
Language	English