Need help?Do you have a question about the Simplex 4100ES-S1 and is the answer not in the manual?
General| Manufacturer | Simplex |
|---|---|
| Model | 4100ES-S1 |
| Type | Fire Alarm Control Panel |
| NAC Outputs | 4 |
| Signaling Line Circuits (SLCs) | 2 |
| Display | LCD |
| Humidity Range | 10% to 93% non-condensing |
| Communication | Ethernet, RS-232, RS-485 |
| Power Supply | 120/240 VAC, 50/60 Hz |
| Power Supply Current | 3A |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Certifications | UL, FM, CSFM |
Details important aspects and procedures for mounting the 4100ES-S1 cabinet.
Explains hardware configuration for CPU, SPS, and other cards via DIP switches and jumpers.
Provides guidelines for interconnecting cards within bays and bays to each other.
Gives guidelines for installing 4”x5” cards and motherboards into the expansion bay.
Covers installation of LED/Switch modules and controller cards for the user interface.
Explains how multiple 4100ES-S1 panels connect in a network using NICs, supporting ring or star.
Details jumper settings for NIC cards, CPU motherboards, and media cards for network configuration.
Provides guidelines for wiring network cards using various media types, including distances.
Step-by-step guide for powering up the system and placing it into operation.
To Next Page
