Need help?Do you have a question about the Simplex 4006-9101 and is the answer not in the manual?
General| Model | 4006-9101 |
|---|---|
| Manufacturer | Simplex |
| Output | 24 VDC |
| Type | Control Panel |
| Voltage Rating | 120 VAC |
| Compatibility | Simplex conventional devices |
| Operating Temperature | 32°F to 120°F (0°C to 49°C) |
| Relative Humidity | non-condensing |
| Dimensions | 14.5" x 12.5" |
Describes compatible smoke detectors, heat detectors, and their bases.
Provides instructions for surface and semi-flush mounting the control panel backbox.
Outlines essential wiring practices, codes, and testing requirements for system installation.
Specifies wiring methods for Initiating Device Circuits (IDCs), including Class A and Class B configurations.
Details wiring requirements, distances, and ratings for Notification Appliance Circuits (NACs).
Explains the wiring and connections for the Digital Alarm Communicator Transmitter (DACT).
Provides safety precautions and procedures for connecting the panel to AC power.
Details the procedure for connecting the system's 24V battery backup, including series connections.
Describes the initial power-up sequence, self-tests, and display status checks.
Outlines requirements for comprehensive testing of the entire installation after modifications.
To Next Page
