Simplex 4100ES-S1 User Manual

2-1
This chapter describes how to mount the 4100ES-S1 cabinet to a wall, and how to mount
system card bays into the cabinets, modules to bays, etc.
Most of a 4100ES-S1 is already assembled within the factory. Steps 2 to 6 below are
therefore not typically required in the field, but are included for reference.
The assembly drawings are included in the appendix of this manual for reference.
Refer to the page number listed in this table for information on a specific topic.
Topic
See Page #
Introduction to 4100ES-S1 Cabinet
2-2
Step 1. Mounting Cabinets
2-9
Step 2. Mounting Card Bays to Cabinets
2-9
Step 3. Configuring Cards
2-9
Step 4. Interconnecting Modules and Bays
2-11
Step 5. Installing Modules into Expansion Bays
2-13
Step 6. Installing LED/Switch Modules into Expansion Bays
2-17
4100ES Fan Control Module
2-22
Chapter 2
Installing 4100ES-S1 Components
Introduction
In this Chapter

Simplex 4100ES-S1 Specifications

General

Brand	Simplex
Model	4100ES-S1
Category	Control Panel
Language	English