Simplicity 1613H - Page 44

Troubleshooting
Figure 27.
A. Upstop
B. Right Hand Arbor Cover
C. Spring
D. Left Hand Arbor
E. Capscrew
38
7. Replace old belt with new belt as shown in figurj 28.
Make sure that V-side of belt runs in arbor pulley
grooves and flat side of belt runs against idler pulley.
8. Reinstall spring to slot in mower deck. Retighten
capscrew securing idler pulley.
9. Reinstall left and right arbor cover, and upstop using
hardware removed .
10. R einstall mower to tractor.
Figure 28.
A. Arbor Drive Pulley (V-Sided)
B. Idler Pulley (Flat Sided)