PART NO. DESCRIPTIONREF NO QTY.
44" Mower Deck - Height Adjustment & Roller Bar
Footnotes
SHAFT ASSEMBLY, Roller, 44", (Includes Ref. Nos. 7 & 9) 1 1685443SM 1
NUT, Adjuster 2 1704082SM 1
NUT, Hex Aluminum Insert Lock, 3/8-16 3 2860681SM 3
SLIDE 4 1677507SM 1
WASHER, Plain, 1/2 5 1924361SM 1
BOLT, Shoulder, 3/8-16 6 2172622SM 1
SPACER, 25/64 x 13/16 x 13/16, Steel, Black 7 1602946SM 2
ROLLER, Rounded, 2-1/2 Long 8 1722036SM 2
NUT, Push 9 1960520SM 2
WASHER, Plain, 1-1/4 10 1924366SM 10
ROLLER 11 1668513SM 7
BAR, Roller 12 1704074ASM 1
NUT, Hex, Flange, Lock, 1/2-13 13 1930644SM 2
CAPSCREW, Hex Head Taptite, 5/16 -18 x 3/4 14 1664847SM 5
WASHER, 3/8 15 1924940SM 5
UP-STOP, 6-1/4 High, Black 16 1722747SM 1
STRAP, Mower Arm Assembly 17 1665374SM 3
CARRIAGE BOLT, 3/8-16 x 1-1/2 18 1931352SM 1
ARM ASSEMBLY, Mower 19 1733521ASM 1
WASHER, 5/16, Black 21 1919381SM 1
ROD, Adjustment 24 1704093SM 1
SPACER, 3/8 x 3/4 x 15/16 25 1706644SM 1
CAPSCREW, Hex Head, 3/8-16 x 1-3/4 26 1922606SM 1
BRACKET, Up-Stop, 6" Long 27 1722748ASM 1
CAPSCREW, Hex Washer Head Taptite, 5/16-18 x 3/4, Black 29 1664847SM 2
PLATE, Mower Support 30 1704080ASM 1
CAPSCREW, Hex Head Taptite, 5/16-18 x 1-1/4 31 1931202SM 2
INDICATOR, Cutting Height 32 1704114SM 1
WASHER, Detent 33 1704097SM 1
TRUNNION 34 1704086SM 1
PIN, Roll, 1 35 2816001SM 1
TRUNNION 36 1704081ASM 1
NUT, Hex, Jam, 1/2-13 37 1913744SM 2
WASHER, 33/64 38 1960170SM 3
PIN, Clevis 39 2118053SM 1
CLIP, Hair Pin 40 1960074SM 3
NUT, Whiz Lock 5/16-18 41 1931277SM 2
BRACKET, Cutting Height 43 1704116ASM 1
ARM, Rear, Mower, RH 44 1704083ASM 1
CAPSCREW, Hex Head, 5/16-18 x 1-1/4 45 1921977SM 2
TRUNNION, Threaded 46 1704087SM 1
CRANK, Cutting Height 47 1719901SM 1
KNOB, Height Crank 48 1714084SM 1
PAL NUT 49 1960093SM 1
The above parts group applies to the following Mfg. Nos.:
2008
47
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved.
1694038 - 44" Mower
1694044 - 44" Mower
1694173 - 44" Mower
TP 400-4204-01-CQ-SMA
To Next Page
Loading...
Need help?
General
