17
Operation
en
Charging the Battery
(Model 7800894)
The battery in this mower is sealed and maintenance
free, and requires no service other than charging. If the
battery will not accept a charge, bring the mower to an
authorized service center for service.
1. Connect the battery charger to the battery con-
nector (A, Figure 15), and plug the charger into a
120-volt outlet for 16-24 hours.
2. Remove the charger from the battery connector,
and connect the battery connector to the engine
harness connector (B).
Important: Use only the charger supplied with the
mower to charge the battery. Using a different charger
may damage the battery and/or mower.
B
Figure 15: Charging the battery
A
WARNING
Keep all sparks, flame and fire away from area when
charging the battery. Never use “BOOST” chargers on
the battery.
!
!
To Next Page
Loading...
