Simpson 2 Series - Page 14

SECTION II
OPERATING INSTRUCTIONS
CAUTION
Connecting test leads to an energized circuit can
present personal and/or equipment hazards. Turn off
power before attaching or removing test leads in or
adjacent to high voltage circuits. This procedure
applies particularly to a current measurement in an
inductive circuit due to the presence of higher than
normal voltages if the current circuit is opened.
+DC
ы VA N 2.5V
lov
50V
PAMPS
250V
COMMON оооу | ос.
NS G a OAO © Oy
12
CONTACTS
AND
SWITCH
POSITIONS
FOR
D.C.
VOLTS