Simpson 2 Series - Fuse Replacement; Parts List

Maintenance
7. After removal, do not turn knobs on front panel or move
any rotors on switches until reassembled.
FUSE REPLACEMENT
Remove the front panel from the case and disconnect the
burned-out fuse, using a small (60-watt or less) soldering
iron. Replace with a 1 amp, 250 volt pigtail fuse, type 3AG
or equivalent only.
Reference
Symbol
Rl
R2
R3
R4
R5
R6
R7
R8
R9
R10
R12
R13
R14
R15
R16
R17
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
Resistor,
PARTS LIST
Description
Simpson
Part No.
1138 ohms (all resistors +4%) 1-117141
110 ohms
21,850 ohms
117,700 ohms
238 ohms (bobbin)
37,500 ohms
200,000 ohms
800,000 ohms
3.75 megohms
45,000 ohms
150,000 ohms
1 megohm
4 megohms
15 megohms
11.2 ohms (bobbin)
0.452 ohm (bobbin)
1-117142
1-117143
1-117144
10-805075
1-117145
1-117146
1-117147
1-117135
1-117148
1-117149
1-117150
7151
1-117136
10-805073
10-805027
33