Simpson 260 - Page 10

10
TABLE 1-2. Items and Accessories Furnished with this Instrument
Quantity
1
*1
*1
2
1
1
Description
Test Lead Set – one red and one black (4 ft. long) each with
combination probe tip and removable rubber-sleeved alligator
clip.
1.5 Volt, D Cell, NEDA 13F
9.0 Volt Cell, NEDA 1604
1 Amp, 250V Fuse, Littlefuse Type #312001
2A, 600V Fuse, Littlefuse Type BLS or (Bussman Type BBS)
Operator’s Manual
Number
00043
6-114338
TABLE 1-3. Additional Accessories
rebmuN golataCnoitpircseD
Deluxe Case .................................................................................................. 00812
Model 150-2 Amp-Clamp .............................................................................. 00545
Accessory AC High Voltage Probe
The 10,000 V AC accessory probe is similar to the high voltage DC probes with
the following exceptions: The AC high voltage probe is designed to extend the
260-8 AC voltage range. The probe can be used with the Simpson 260-8 10-volt
AC range.
NOTE: Instructions are furnished with each high voltage probe.
AMP-CLAMP MODEL 150-2
The Simpson Amp-Clamp Model 150-2 allows AC current measurements without
breaking the circuit under test. The Amp-Clamp works in effect as a transformer
containing a split core for accommodating the conductor which carries the current
being measured. The current carrying conductor becomes the transformer pri-