Number of usages with an unclean lint filter (based on laboratory tests using a load of new towels)
The lint filter is located at the front of your dryer at the bottom of the door opening.
You must clean this lint filter after every load.
To remove the lint filter open the door and press the two pads together. Pull the lint filter out of the pocket. To remove the lint filter open the door and press the two pads together. Pull the lint
filter out of the pocket.
Open apart the lint filter and wipe or peel off the lint.
Ensure the lint filter ‘clicks’ when replacing. It can be inserted into the pocket either way.
Never operate your dryer without the lint filter.
Do not allow lint to build up around your dryer.
A torn or damaged lint filter must be replaced immediately.
Overloading can increase lint build-up because the airflow is reduced.
To avoid potential fire hazards, we recommend that you pay a qualified service technician to periodically clean your dryer. You must do this also when you change your mounting from
upright to inverted, or vice versa.
DRYING GUIDE
Your load, when dry must not exceed the rated capacity.
4kg for the 4kg Machine
5kg for the 5kg Machine
6kg for the 6kg Machine
(See page 6 for a table of average weights of laundry items) Always check your labels for the drying symbols which the International Care Labelling Code now uses.
Maybe tumble dried
To Next Page
Loading...
