Simpson Washing Machine - To Start the Wash Cycle; Program

TO START THE WASH CYCLE / PROGRAM
MACHINE IN PAUSE MODE
You can tell when your washing machine is in pause mode.
Press the START/PAUSE button.
START/PAUSE is used to Start, Stop and Continue the wash.
If you have started your wash and you wish to stop it for some reason,
press the START/PAUSE button to enter the pause mode.
A PROGRESS INDICATOR light is ‘FLASHING’ and the IN PROGRESS
light is ‘OFF’.
You can tell when a wash program is in progress.
The IN PROGRESS light is ‘ON’.
WASH CYCLE IN PROGRESS
NOTE:
Do not hold the button down as this will advance the cycle, refer page 13
Advancing The Wash Progress.