ABOUT YOUR WASHING MACHINE
5
Out of balance interruption
The washing machine can stop during the spin stage of a wash because of an out of
balance condition.
All three WATER TEMP lights will be flashing rapidly to tell you an out of balance
interruption has happened.
Out of balance during spin is caused by an uneven distribution of clothes in the wash
bowl.
To rectify the out of balance condition, open the lid and redistribute the clothes evenly in
the space between the agitator and wall of the wash bowl.
Closing the lid will start the machine and continue the spin stage of the wash.
If you have frequent out of balance interruptions, it may be due to your washing machine
not standing firm and level on the floor.
This can be corrected by adjusting the washing machine legs as described in the
Installation Instructions supplied with your machine.
Button response and lights
Always press buttons gently.
Watch the lights on the control panel to see the effect pressing a button or turning a program
selector knob has, and listen for ‘BEEPS’.
When you press a button you will get a short ‘BEEP’ to acknowledge the entry. If the
option is not available at the time, a long ‘ERROR BEEP’ will be heard.
NOTE: All functions of the washing machine will stop when the lid is open, except for pump out
before spin.
To Next Page
Loading...
