204.0 mm (8.1”)
183.0 mm (7.2”)
57.0 mm (2.2”)
180.0 mm (7.1”)
190.0 mm (7.5”)
169.0 mm (6.63”)
91.0 mm (3.6”)
Dimensions Mounting
Parts included
1. 1 x NAC™ -2 Autopilot Computer - IPX5
2. 1 x NAC™ -2 Power cable - 2 m
3. 1 x NAC™ -2 Drive cable - 2 m
4. 1 x NAC™ -2 Feedback cable - 2 m
5. 1 x NMEA 2000® Network cable - 0.6 m
6. 1 x Micro-C T-Joiner
7. 4 x Fixing screws
8. Warranty card & literature pack
NAC
™
-2
INSTALLATION GUIDE
For setup instructions, commissioning guide,
product manuals, technical specifications,
certificates and declarations,
refer to the product website:
www.simrad-yachting.com
www.bandg.com
Trademark
®Reg. U.S. Pat. & Tm. Off, and ™ common law marks.
Visit www.navico.com/intellectual-property to review
the global trademark rights for Navico Holding AS.”
1
2
3
4
5
6
7
*988-11144-002*
System wiring example
AUTOPILOT
CONTROLLER
2
1
NMEA 2000® Backbone
Micro-C Drop cable
Micro-C Power cable
Micro-C T-Joiners
Micro-C Terminator, 120 Ohm
Drive cable
1
T T
MFD
12/24V DC
12/24V DC
12V DC
NAC™ -2
COMPASS
GPS
SENSOR
DRIVE UNIT
RUDDER
FEEDBACK
6
5
4
3
2
3
4
5
6
Power
NMEA 2000® Backbone
Micro-C Drop cable
Rudder Drive cable
IPX5
To Next Page
Need help?
General
