Need help?Do you have a question about the Simrad AP50 and is the answer not in the manual?
General| Brand | Simrad |
|---|---|
| Model | AP50 |
| Category | Autopilot System |
| Language | English |
Introduces the Simrad AP50 autopilot system and its place in marine navigation.
Provides guidance on navigating and understanding the manual's structure and content.
Lists and describes the essential units of a basic AP50 autopilot system.
Details the AP50 control unit's features, mounting, and connectivity.
Compares the J50 and J50-40 junction unit models and their capabilities.
Introduces different rudder feedback units like RF300S, RF45X, and RF14XU.
Describes various heading sensors compatible with the AP50 system.
Lists available optional accessories that can enhance the AP50 system.
Provides a visual overview of the AP50 autopilot's front panel and its buttons.
Explains how to turn the system on/off and enter standby mode.
Details the zero point setting procedure for the MSD50 stern drive.
Describes the operation and controls for the Follow-Up steering mode.
Explains the Non-Follow-Up steering mode and its associated controls.
Covers the AUTO and AUTO-WORK modes for automatic vessel steering.
Explains how to integrate and use a thruster with the AP50 autopilot.
Details navigation capabilities using external sources like GPS/Chartplotters.
Explains the dodging function for evasive maneuvers around obstacles.
Describes special turn modes like U-turn and C-turn for course adjustments.
Explains how the AP50 operates in a multi-station configuration.
Describes the system's lock function to control active units and prevent unauthorized changes.
Explains how to select external steering system inputs.
Guides users on accessing and adjusting system settings via the User Set-up menu.
Explains how to navigate and select different instrument display screens.
Lists the overall technical specifications of the AP50 autopilot system.
Provides detailed technical specifications for the AP50 control unit.
Details technical specifications for the J50 and J50-40 junction units.
Specifies the technical details of the RF300S Rudder Feedback Unit.
Details technical specifications for the NI300X NMEA Interface.
Provides an overview of the AP50 autopilot installation requirements and systems to interface with.
Lists the sequence of steps for performing the AP50 system installation.
Provides detailed instructions for mounting and connecting the RF300S rudder feedback unit.
Provides instructions for installing the J50 Junction Unit, including cable connections and grounding.
Gives instructions for panel and optional bracket mounting of the AP50 control unit.
Covers connecting external equipment like NMEA devices, radar, and heading repeaters.
Explains the purpose and categories of the AP50's installation set-up.
Guides the user through navigating and performing the initial installation setup menus.
Explains how to access the Service Menu for system data and tests.
Guides users through adjusting steering and thruster parameters in the Settings Menu.
Lists common display readouts, probable faults, and recommended actions for troubleshooting.
To Next Page
