Need help?Do you have a question about the Simrad AC12 and is the answer not in the manual?
General| Brand | Simrad |
|---|---|
| Model | AC12 |
| Category | Autopilot System |
| Language | English |
Overview of the autopilot computer as the main unit in AP24/AP28 systems.
Guide on installing and maintaining autopilot computers and related system components.
Information on checking serial number and software version for system units.
Procedure for upgrading Simrad product software.
Steps for configuring and installing the autopilot system.
Guidelines for inspecting and handling autopilot system components upon receipt.
Importance of understanding system setup before beginning installation.
Diagrams illustrating basic and optional autopilot system configurations.
Instructions for mounting and cabling the AC12/AC42 autopilot computers.
Steps for mechanically linking and mounting rudder feedback units.
Details on installing the LF3000 linear feedback unit with drive units.
Information on connecting various drive units to the autopilot computer.
Procedures for panel and bracket mounting the AP24 and AP28 control units.
Guidance on selecting the correct mounting location for compass sensors.
Mounting instructions for the R3000X remote control unit.
Reference to separate installation instructions for the JS10 Joystick.
Connecting the S35 NFU lever to the autopilot computer.
Options for connecting the autopilot system to other marine equipment.
Guidelines for SimNet cable installation, power, and termination.
Connection details for an external alarm relay or buzzer.
General specifications for the autopilot system, including boat types and connections.
Detailed specifications for the AP24 control unit, including dimensions and operating conditions.
Detailed specifications for the AP28 control unit, including dimensions and operating conditions.
Specifications for AC12 and AC42 autopilot computers, including power and drive capabilities.
Technical details for the FC40 fluxgate compass, including performance and environmental specs.
Technical details for the RC42 rate compass, including performance and environmental specs.
Specifications for the RF300 rudder feedback unit, including linearity and operating range.
Specifications for the RF25 rudder feedback unit, including accuracy and output signal.
Specifications for the R3000X remote control unit, including dimensions and operating conditions.
Specifications for the JS10 joystick, including environmental protection and dimensions.
Technical parameters for the SimNet network, including cable length and bit rate.
Explanation of the IP rating system for system components.
Details on the AT10 converter for SimNet and NMEA0183 data.
To Next Page
