Technical specifications | 45
4.8 RF25 Rudder Feedback
Dimensions:.............................. See Figure 4-7 and Figure 4-8.
Weight: ..........................................................0,5 kg (1,1 lbs)
Material: .................................................. Arnite T06 200 PBT
Environmental Protection:................................................ IP56
Temperature range:
Operation:.....................–25 to +55 °C (–13 to +130 °F)
Storage:.......................–30 to +70 °C (–22 to + 158 °F)
Mounting: ..........................Horizontal, vertical, or upside down
Supply and interface:....................................8-16V via SimNet
Power consumption:...................................................... 0,4 W
SimNet Network load factor (NL): ..........................................1
SimNet ports (input/output): ................................................1
Cable supplied:............ 5,5 m (18’) SimNet cable with connector
Rudder angle: ....................................................±120 degrees
Output signal: .......................... SimNet/NMEA2000 PGN127245
Accuracy:............................................................±0.7°
Repeatability: ......................................................±0.1°
Transmitter link:......Stainless 345 mm (13.6") with 2 ball joints.
Ball joint stud for rudder arm requires
4.2 mm diameter hole and 5 mm tap.
NMEA2000 compliant
4.9 R3000X Remote Control
Dimensions:.....................................................See Figure 4-9
Weight: ..........................................................0,4 kg (0,9 lbs)
Material:.............................................Epoxy coated aluminum
Environmental Protection.................................................IP56
Safe distance to compass: ............................... 0.15 m (0.5 ft.)
Temperature range:
Operation:.....................–25 to +55 °C (–13 to +130 °F)
Storage:.......................–30 to +70 °C (–22 to + 158 °F)
To Next Page
Loading...
Need help?
General
