|
1
A2004
Quick Guide
The front panel
1
987
6
5
32
10 11
4
1 Power key
In any mode: Press to show the Display setup dialog. Repeat short presses to toggle
preset light levels.
In Standby mode: Press and hold to turn the autopilot system to Sleep mode.
Re-press the key to re-activate the system.
2 MENU key
Press once to display the Quick menu.
Press twice to show the Settings menu.
3 X key
Press to return to previous menu level or to exit a dialog.
Press and hold to exit the menu system and return to last active mode page.
4 Rotary knob
Menu and dialog operation:
• Turn to move up and down in menus and dialogs
• Turn to adjust a value
• Press to select a menu option and to enter the next menu level
In Standby and NFU mode: Press to activate Follow up (FU) mode.
In FU mode: Turn to set the rudder angle.
In automatic modes: Turn to change the set heading/set course, press to re-activate
automatic mode with current heading/course as reference.
5 STBY key
Press to activate Standby mode.
EN
To Next Page
Need help?
General
