Simrad CR34 - Page 188

Index CR34/44/54 ChartRadar
Depth & temperature diagram 5-1
Differential data 6-7
- DGPS information 7-9
- SDGPS information 7-11
- SDGPS systems 7-11
- status indicator & accuracy 6-7
DOP limit 7-8
DSC info 7-14
Echo menu 5-1
ETA & AVN display 6-10,A-1
External switch 9-18
Factory settings 9-24
- master reset 9-26
- power off - reset 9-25
- return to all factory presets 9-24
Fundamentals 2-1
Global Positioning System 1-1
Glossary of terms A-1
GOTO menu 4-14
- advance to next point 4-14
- restart to approaching point 4-14
- select NAV mode 4-14
- turn NAV off 4-14
GPS receiver type 9-9
How to get started 1-3
HDOP limit 7-8
Initial start-up 2-7
Interface setup, alarm output 9-18
Interface setup 9-11
- description of sentences 9-21
-
return to SimNet/NMEA presets 9-24
Introduction 1-1
Key functions 2-3
-dedicated function keys 1-4
Key symbols in manual 1-2
Language 2-9,9-9
Light & contrast 2-7
Lines,
- delete all 8-10
- draw new line 4-15
- edit via chart 4-10,4-11
- edit via menu 8-10
- line list 8-9
- stored in the memory 8-9
Local time and date 9-7
Log 6-6,6-7
- reset 6-7
- speed calibration 9-15
Loran C 7-6
- list of Loran C chains 7-6
Maintenance 10-2
Master reset 9-26
Measurement units 9-9,A-1
- setup 9-9
Memory,
- delete 9-24
- used 9-24
Menu bar 2-5
Menu layout 2-6
Miscellaneous menu 7-1
MOB function back of front cover
- alarm and navigation 6-19
- check last activated MOB 6-19,8-15
- external switch 9-18
- turn MOB function off 6-19
Naming of routes, points, etc. 2-7
Navigation,
- advance to next point 4-14
- Approx.Velocity Necessary 6-10
- auto waypoint shift 6-3
- cursor navigation 6-14
- Estimated Time of Arrival 6-10
- examples 6-14
- highway display 6-5
- orientation on chart 4-17
- restart to approaching point 4-14
- route navigation 6-16
- set & drift display 6-12
- setup 6-3