Need help?Do you have a question about the Simrad NSS12 and is the answer not in the manual?
General| Display Size | 12.1 inches |
|---|---|
| Display Resolution | 1280 x 800 pixels |
| Touchscreen | Yes |
| Chartplotter | Yes |
| Sonar Capability | Yes |
| Waterproof Rating | IPX7 |
| Video Input | Yes |
| Processor | Dual-core |
| Operating System | Simrad OS |
| Radar | Yes |
| Networking | NMEA 2000, NMEA 0183, Ethernet |
| GPS Receiver | Built-in |
Details copyright notice and warranty information for the product.
Compliance statements, intended use, and registered trademarks.
Provides warnings regarding unauthorized modifications and safe operating practices.
Defines the manual's purpose and assumes user familiarity with navigation basics.
Explains how important text, notes, and warnings are highlighted.
Lists the necessary tools for preparing the installation process.
Details the items included in the NSS system package.
Provides guidance on choosing an appropriate and safe mounting location.
Step-by-step instructions for flush mounting the NSS display.
Instructions for installing the NSS display using a bracket mount.
Provides essential guidelines for safe and effective cable routing and management.
Details the fundamental power connection requirements for the NSS display.
Explains the function and configuration options for the yellow Power Control wire.
Guides on connecting and configuring an external alarm system.
Recommends optimal locations for mounting external GPS antennas for best reception.
Information on the built-in echosounder for NSS7 and NSS8 models.
How to connect optional external echosounder modules via Ethernet.
Details on adapter cables for connecting existing transducers.
Configuration for echosounder source, depth offset, and water speed calibration.
Overview and connection diagram for the Broadband Radar (3G/4G).
Connection overview and components for the HD Radar system.
Configuration of radar settings including status, alignment, and interference rejection.
Instructions on how to connect composite video cameras to the display unit.
Adjusting video settings such as brightness, contrast, and hue.
Wiring diagram for NMEA 0183 serial balanced data output.
Wiring diagram for NMEA 0183 single ended data output.
Configuring the serial port settings for NMEA 0183 communication.
Guidelines for connecting NMEA 0183 devices as talkers and listeners.
Overview of NMEA 2000 port functionality and essential network information.
Steps for planning and installing the NMEA 2000 network backbone.
Instructions on how to properly supply power to the NMEA 2000 network.
Explains how data is converted and shared between different NMEA protocols.
Configuration for selecting and managing NMEA 2000 data sources.
Describes direct Ethernet connection from NSS to a single network module.
Information on expanding Ethernet network connectivity for multiple devices.
Wiring diagrams for connecting autopilot computers (AC12/AC42, SG05) and accessories.
Procedures for verifying connection and performing initial dockside setup and commissioning.
Calibrating the rudder drive and onboard compass for accurate operation.
Fine-tuning steering parameters like seastate filter, sailing settings, and auto-trim.
Enabling and configuring CZone functionality and dipswitch settings on the NSS.
Configuring CZone display at startup and synchronizing backlight settings.
Procedures for backing up waypoints, routes, tracks, and system settings.
Instructions for downloading and applying software updates to the NSS unit.
Procedures for updating firmware on SimNet and Ethernet devices.
Steps for performing a nine-point calibration of the touchscreen.
Overall dimensions, cut-out, and mounting details for the NSS7 model.
Overall dimensions, cut-out, and mounting details for the NSS8 model.
Overall dimensions, cut-out, and mounting details for the NSS12 model.
Details the pin assignments and wire colors for the power connector.
Details the pin assignments and wire colors for the video/data connector.
Details the pin assignments for the NMEA 2000 connector.
Details the pin assignments for the Ethernet network connector.
Details the pin assignments and functions for the echosounder connector.
Lists part numbers and descriptions for various NMEA 2000 cables.
Lists part numbers and descriptions for various Ethernet cables.
Lists supported NMEA 2000 Parameter Group Numbers (PGNs) for receiving data.
Lists supported NMEA 0183 sentences for transmit and receive operations.
Basic preventative maintenance recommendations for the NSS unit.
Guidelines for cleaning the display, media port, keys, and connectors.
Information on obtaining and installing the latest software updates.
Lists common operational failures and their corrective actions.
Technical specifications for the NSS display models (resolution, brightness, touch screen).
Details power supply, consumption, housing, temperature, and waterproof ratings.
To Next Page
