Need help?Do you have a question about the Simrad AP48 and is the answer not in the manual?
General| Brand | Simrad |
|---|---|
| Model | AP48 |
| Category | Marine GPS System |
| Language | English |
General product information and liability.
Specifies the official language of the documentation.
Copyright information.
Information about warranty.
Conformance statements for Europe.
Compliance warnings for the USA.
Conformance statements for Australia/NZ.
Links to declarations of conformity.
List of registered trademarks.
Description of the AP48 unit's physical controls.
Explains the main display screen and its components.
Crucial safety advice for using the autopilot.
Instructions for powering the unit.
Steps for initial setup and configuration.
How to put the unit into low-power sleep mode.
Guide to navigating menus and dialogs.
Options for adjusting screen brightness, color, etc.
How to choose between different autopilot steering modes.
Explains Standby, Non-Follow Up (NFU), and Follow-up (FU) modes.
Steers the vessel to a set heading, without drift compensation.
Steers along a calculated track line, compensating for drift.
Steers to a waypoint using external navigation data.
Automatic turning maneuvers like C-turn, Spiral, Zigzag, Square, S-turn, and DCT.
Integration with EVC systems and SteadySteer feature.
Records distance traveled through the water.
Records distance traveled via GPS.
Shows total distance run.
How alarms are displayed, signaled, and classified by color.
Procedures for acknowledging, enabling alarms and the siren.
Customizing settings for specific alarms.
Viewing past alarm messages and referencing alarm details.
Covers boat speed, SOG, distance, MHU alignment, depth, heading, rudder, pitch/roll, environment.
Covers autopilot, system, network, sources, device list, diagnostics, bus state, network groups, units, display, language, time.
Covers damping, advanced, using COG as heading, and magnetic variation.
Covers files, simulate, restore defaults, global reset, and about.
Basic upkeep, protection, and cleaning of the unit.
Visual inspection of connectors and backing up system data.
How to update the unit's software via USB.
Lists available calibration and damping configuration options.
Lists available trip log and alarm configuration options.
Lists available autopilot and system configuration options.
Dimensions, weight, voltage, consumption, and environmental protection.
Screen size, resolution, brightness, mounting, and upgrade method.
Temperature, humidity, alarm level, and storage conditions.
Technical drawings showing the unit without a bracket.
Technical drawings showing the unit with the mounting bracket.
List of data PGNs the unit can transmit over NMEA 2000.
List of data PGNs the unit can receive over NMEA 2000.
Detailed list of autopilot alarms and troubleshooting steps.
List of system alarms and their causes and recommended actions.
To Next Page
