4 Rotary knob
Menu and dialog operation:
• Turn to move up and down in menus and dialogs
• Turn to adjust a value
• Press to select a menu option and to enter the next menu
level
In Standby mode or Non Follow Up (NFU) mode: Press to
activate the Follow up (FU) mode
In FU mode: Turn to set the rudder angle
In automatic modes: Turn to change the set heading/set
course/set wind angle
I AUTO mode: Press to capture current heading
5 - 8 < 10, < 1 and 1 >, 10 > (Port and starboard keys)
In Standby or FU mode: Press to activate NFU mode
In NFU mode: Press to control the rudder
In automatic modes: Press to change the set heading/set
course/set wind angle 1° or 10° to port or starboard
9 STBY key
Press to activate Standby mode
10 MODE key
Press to show the Mode list
11 AUTO key
Press to activate AUTO mode
The autopilot page
The content of the autopilot page varies with active mode. All
modes include:
• Response/ Profile mode (depending on connected autopilot
computer) (A)
• Heading indicator, analog and digital (B)
• Autopilot mode indication (C)
• Rudder indicator, analog and digital (D)
Introduction | AP™ 48 Operator Manual
11
To Next Page
Loading...
Need help?
General
