Display setup
The display setup can be adjusted at any time from the Display
setup dialog, activated by pressing the power key.
The following options are available:
• Backlight level: Adjusts the backlight level from Min (10%) to Max
(100%) in 10% increments
-
When the Backlight level field is active, subsequent presses on
the power key adjusts backlight level in decrements of 30%
• Display group: Defines which network group the unit belongs to
• Night mode: Activates/deactivates the night mode color palette
• Night mode color: Sets the night mode color palette
• Invert day color: Changes the background color for the pages
from default black to white
• Sleep: Turns the backlight for screen and keys off to save power
Ú
Note:
All changes made to the display setup will apply to all
units belonging to the same display group. For more
information about network groups, refer to "Network groups" on
page 38.
Ú
Note: The system will switch to Standby mode when Sleep
mode is activated.
Basic operation | AP™ 48 Operator Manual
15
To Next Page
Loading...
Need help?
General
