AP48
Quick Guide
EN
1
987
6
5
32
10 11
4
1
Power key
• Press to show the Display setup dialog. Repeat short presses to toggle preset
light levels
• Press and hold to put the autopilot system to Sleep mode. Repress the key to
activate the system
2
MENU key
Press to show the Settings menu.
3
X key
Press to return to previous menu level or to exit a dialog.
4
Rotary knob
Menu and dialog operation:
• Turn to move up and down in menus and dialogs
• Turn to adjust a value
• Press to select a menu option and to enter the next menu level
For mode operation refer to the autopilot modes table.
5-8
< 10 , < 1 and 1 >, 10 > (Port and starboard keys)
Press to change the set heading/set course/set wind angle 1° or 10° to port or
starboard.
For mode operation refer to the autopilot modes table.
9
STBY key
Press to activate Standby mode.
10
MODE key
Press to show the Mode list.
11
AUTO key
Press to activate Auto mode.
|
1
To Next Page
Need help?
General
