CR40/42/50 MKII ECHO and SPECIAL menus Chapter 8
117
A-Z
Rename display – max. 31 characters,
- refer to “Naming of routes, points, etc.” in section 2.6.
+/-
Toggle between available color settings
ENT
Confirm new setup
8.2.7 Factory settings
It will be possible to erase a single category of objects entered into the
unit by the user – for example, if moving to a different place in the
world you may no longer need the routes, etc. you have in the memory.
However, an alternative is to store the data on a DataCard - refer to
section 5.8.
If the unit is still “alive” but has ceased to respond to normal operation,
it could become necessary to return to ALL factory presets – but first
check “Troubleshooting” in section 9.12.
) Activating the “Return to all factory presets!” will erase all settings
including user data i.e. waypoints, routes, tracks, etc., and restore the
basic settings from the factory.
Show test display
Information in this display is for technicians only.
MENU
Call up the menu bar, and…
7,7
activate Factory settings display
- see display example next page.
To Next Page
Loading...
