CR40/42/50 MKII Chart menus and INFO windows Chapter 3
33
All user data in the CRXX system are described below.
To obtain a “cleaner” view of the chart details, you can turn some of
the settings OFF if they do not contribute to the clarity of the chart area
you wish to explore. All the listed objects that can be turned on and off
speaks for themselves – they are either “shown on the chart” or “not
shown on the chart”.
Chart settings
Chart can be set to
NORMAL, COMPRESSED and CHART OFF:
NORMAL
- will show the normal amount of details in the selected chart
scale.
COMPRESSED - will ordinarily provide more details in the same scale.
CHART OFF
- will only show all the user-made data such as waypoints,
routes, lines and tracks, etc.
Landfilling can be ON or OFF. When OFF there will be no special
color to indicate where the land on the chart is (if any) i.e. land will be
all blue.
Boundary lines will indicate available C-MAP chart areas.
Chart area can be set to
LARGE, MEDIUM
or
SMALL:
LARGE
– Opens a large chart area for pan and scroll. Chart re-draw
time is standard.
MEDIUM
– Opens a medium-size chart area for pan and scroll.
Chart re-draw time is faster than standard.
SMALL
– Opens a small chart area for pan scroll. Chart re-draw time is
the fastest.
Orientation can be set to
NORTH UP, HEAD UP
or
NAV UP
, and the
mode can be
RELATIVE
or
TRUE
motion.
NORTH UP
– The chart will always be presented as north up.
HEAD UP
– The chart will automatically turn, so your actual course
(COG) is up. If a compass is connected, the reference will automatic-
ally change to heading (compass).
NAV UP
– The chart will automatically turn, so your bearing to desti-
nation is up.
) To enable chart rotation, the chart cursor must be turned off [CLR].
To Next Page
Loading...
